|
BS 5400 is a British Standard code of practice for the design and construction of steel, concrete and composite bridges. It is applicable to highway, railway and pedestrian bridges. The standard specifies the requirements and the code of practice〔BS 5400-3:2000 Steel, concrete and composite bridges. Code of practice for design of steel bridges.〕〔BS 5400-4:1990 Steel, concrete and composite bridges. Code of practice for design of concrete bridges.〕 on design of steel,〔 concrete (reinforced, prestressed or composite)〔 and composite bridges that use steel sections (rolled or fabricated, cased or uncased)〔BS 5400-5:2005 Steel, concrete and composite bridges. Code of practice for design of composite bridges.〕 as well as the materials and workmanship in bridge erection. The standard also includes the specification and calculation of standard bridge loads, the application of the limit state principles,〔BS 5400-1:1988 Steel, concrete and composite bridges. General statement.〕 analysis, and fatigue load calculation〔BS 5400-10:1980 Steel, concrete and composite bridges. Code of practice for fatigue.〕 and the ''reservoir method'' for fatigue load cycle counting.〔 The standard also covers the structural design of bridge foundations〔 and design and requirements on bridge bearings for ordinary and moving bridges.〔BS 5400-9.1:1983 Steel, concrete and composite bridges. Bridge bearings. Code of practice for design of bridge bearings.〕〔BS 5400-9.2:1983 Steel, concrete and composite bridges. Bridge bearings. Specification for materials, manufacture and installation of bridge bearings.〕 In 2010, BS 5400 was superseded by the Structural Eurocodes for the design of new bridges. However, BS 5400 still forms the basis of assessment standards for existing highway and railway structures. Some of the prescriptive clauses from the old code have been re-cast in a form consistent with the principles of the Eurocodes and presented as advisory material within British Standard Published Documents; these exist as non-contradictory complementary information (NCCI) to the Eurocodes and offer means of compliance with the requirements of the Eurocodes, typically using closed-form solutions familiar to the engineer experienced in the application of BS5400. ==Different parts of BS 5400== BS 5400 consists of ten main parts: *(BS 5400-1:1988 ) Steel, concrete and composite bridges. General statement. *(BS 5400-2:2006 ) Steel, concrete and composite bridges. Specification for loads. *(BS 5400-3:2000 ) Steel, concrete and composite bridges. Code of practice for design of steel bridges. ''(This part of standard is being partially replaced)'' *(BS 5400-4:1990 ) Steel, concrete and composite bridges. Code of practice for design of concrete bridges. *(BS 5400-5:2005 ) Steel, concrete and composite bridges. Code of practice for design of composite bridges *(BS 5400-6:1999 ) Steel, concrete and composite bridges. Specification for materials and workmanship, steel. ''(This part of standard is replaced by (BS EN 1090-2 ) (EN 1090-2) but remains current)'' *(BS 5400-7:1978 ) Steel, concrete and composite bridges. Specification for materials and workmanship, concrete, reinforcement and prestressing tendons. *(BS 5400-8:1978 ) Steel, concrete and composite bridges. Recommendations for materials and workmanship, concrete, reinforcement and prestressing tendons. *(BS 5400-9.1:1983 ) Steel, concrete and composite bridges. Bridge bearings. Code of practice for design of bridge bearings. ''(This part of standard is partially replaced by (BS EN 1337-2 ) (EN 1337-2), (BS EN 1337-3 ) (EN 1337-3), (BS EN 1337-5 ) (EN 1337-5) and (BS EN 1337-7 ) (EN 1337-7), and replaced by (BS EN 1337-4 ) (EN 1337-4) and (BS EN 1337-6 ) (EN 1337-6) but remains current)'' *(BS 5400-9.2:1983 ) Steel, concrete and composite bridges. Bridge bearings. Specification for materials, manufacture and installation of bridge bearings. ''(This part of standard is partially replaced by (BS EN 1337-2 ) (EN 1337-2), (BS EN 1337-3 ) (EN 1337-3), (BS EN 1337-5 ) (EN 1337-5) and (BS EN 1337-7 ) (EN 1337-7))'' *(BS 5400-10:1980 ) Steel, concrete and composite bridges. Code of practice for fatigue. *(BS 5400-10C:1999 ) Steel, concrete and composite bridges. Charts for classification of details for fatigue. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「BS 5400」の詳細全文を読む スポンサード リンク
|